Dock n talk user manual

Please Note: A standard landline phone is required and is not included. Device Details. Accessory Tips. Read and understand all instructions.

Unplug the unit from the wall outlets before cleaning. Do not use liquid cleaners or aerosol cleaners. Avoid using the product during an electrical storm. There may be a remote risk of electric shock from lightning. Print page 1 Print document 28 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Due to a satellite network, if you are in motion, the satellite signal may become obstructed such as buildings, bridges, tunnels, larger vehicles, valleys , large trees.

If your satellite setup is not obstructed and yet you have no signal, you will need to perform the following checks:. Voice quality may be affected by many factors. Before making a call, make sure that the signal strength is at least bars some terminals the signal LED should be bright green, not orange, or red. If the setup cannot achieve the signal level required, there is a possibility that there is a problem with the setup.

The buzzing sound usually begins when noise picked up by the power supply or the audio circuit and manifests as a buzzing sound to the in-vehicle unit. Also observe whether the buzzing sound is influenced by external interference from outside the vehicle, trains, large machinery, other communication equipment.

Buzzing sound may be suppressed by incorporating power supply filters. Consult a local electronics shop for advice. Check the location of microphone if applicable , make sure it is not located near an air vent or too close to an open window. To update the ExtremeDD firmware, download the latest version of Eagle on the product's support page.

Upgrade the Iridium P Extreme Handset to most recent firmware version. Contact support Print. Servicing and warranty View product details. Why don't I have power on the docking unit? Check power is connected to the interface unit.

My unit powers off once the ignition is switched off or the key is removed after 20 minutes. The docking station keeps beeping and the Iridium handset is not turning on. This is usually an indication that the Iridium handset has crashed and unfortunately even though the docking station is trying to restart the Iridium handset the phone is not responding. To resolve this problem the Iridium handset must be removed from the cradle, have the battery detached for 10 seconds, replaced and then redocked into the cradle.

The Iridium handset restarts whilst docked. Sometimes an Iridium handset may become temporarily unresponsive to the docking station.

When the handset is on PTT Mode, the dock should be at least at version 1. My Beam Iridium docking station in the vehicle does not stay on. It is possible that the accessory wire is not wired correctly or has been disconnected. Screenshot shows how the dock behaves relative to the accessory wire connection.

My Beam Extreme Docking station does not stay on with the Extreme handset. The dock will try to switch on the handset, but unable to keep it on. It is recommended to check the following: The Extreme handset has two battery options, a slim battery or an extended battery. If a slim battery is used, make sure the battery Infill plastic must be in place Refer to Extreme Dock user manual.

The use of the infill for slim battery will make sure the handset contacts align with the docking station contacts. Firmware upgrade versions 5. Enjoy your new speakers! Brits, Aussies, Kiwis, Scots, South Africans and other riders with different accents will feel the improvement. Bug fixes in music playing via a few models of mobile devices, so that everyone could enjoy the best audio quality, listening to their music.

Did you ever get to change the system announce volume by mistake on standby mode? That was a bit confusing, right? We decided to cancel that option to avoid confusion. No need to use the community or choose regions anymore. Software Update v4. Helpful Tips. Register your unit. Frequently asked questions. Is my unit still under warranty? All Cardo units come with a 2-year warranty, starting from the date of purchase. Please keep your proof of purchase in order to reclaim your warranty.

Your first point of warranty service is your dealer. Sound quality is best when the speakers are placed directly opposite your ear canal. Verify that the speakers are correctly placed inside your helmet by following the next steps. With the helmet on, slide your finger inside the helmet and press against the side of the helmet where your ear is. This is where the speakers should be positioned. Remove the helmet, but keep your finger in that spot.

Check to make sure the speakers are in this position. Make sure the speakers are positioned as close to your ear as possible so you can feel them. If necessary, use the included Velcro booster pads behind the speakers to get them closer to your ear. Since every head is different, you may find that your helmet ear cavities are not placed optimally. If this is the case consider placing the speakers outside your helmet ear cavities right opposite your ears.

Pair the first rider to your unit on channel A. Pair the second rider to your unit on channel B. Ask the first or the second rider to pair the fourth member of the group on their free channel. Consult the Pocket guide Or the user manual For more details.

How can I get more riding time out of my battery? Your product comes with a Charge while riding feature that allows you to plug in the unit into the bike's 12V charger or a power bank, and continue riding long after the standard battery time has passed. In order to do it, just plug your unit into the power source — the unit will shut down.

Turn it back on again and you're set. Which mobile app do I need to download for my device?