Alpine cde-111r manual

Related products. Manual Download. All Rights Reserved. Use of this site signifies your agreement to the Terms of Use. Playback of AAC files encoded by iTunes is supported.

This device can only display single-byte alphanumeric characters up to 30 for ID3 tags and up to 15 for WMA tags and the underscore.

If information contains characters other than ID3 tag information, the audio file may not be played back. The tag information may not be correctly displayed, depending on the contents.

Playback may not be performed if a disc exceeds the limitations described above. Under the ISO standard, there are some restrictions to remember. The maximum nested folder depth is 8 including the root directory. This device also can play back discs in Joliet, Romeo, etc. However, sometimes the file names, folder names, etc. This device cannot correctly play back discs recorded with Track At Once or packet writing.

Order of files Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. The playback order of the folders and files is as follows. The higher the bit rate, the higher the sound quality, but also the larger the files.

Sampling rate This value shows how many times per second the data is sampled recorded. For example, music CDs use a sampling rate of The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Root folder The root folder or root directory is found at the top of the file system.

The root folder contains all folders and files. It is created automatically for all burned discs. Turn the Rotary encoder until the desired sound is obtained in each mode. See the applicable section below for details about the selected setting item.

You can emphasise the treble level. Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency.

Loudness introduces a special low-and high-frequency emphasis at low listening levels. Press and hold Rotary encoder LOUD for at least 2 seconds to activate or deactivate the loudness mode. Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. Displaying the Text Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc.

It is also possible to display the folder name, the file name and the tag, etc. Text compatible CDs contain text information such as the disc name and track name. An optional adapter cable is required standard RCA to 3. All other tag data is ignored. Setting You can flexibly customize the unit to suit your own preferences and usage. For example, even at low volume settings, the subwoofer is still audible. TYPE2 : When the colour of the four buttons is green, the colour of the other is green.

TYPE3 : When the colour of the four buttons is amber, the colour of the other is red. TYPE4 : When the colour of the four buttons is red, the colour of the other is red.

When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown. Adjust the level by turning the Rotary encoder.

If a disc has already been inserted, remove it first. If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. POW ON :. However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. Initial setting on the unit is OFF. If all the 5 positions have been registered, you cannot register the 6th device.

To register another device, you need to delete one of the device from position1 to 5 first. However, the connection may fail. If the auto connection fails, try the connection manually. For details, refer to each individual function. Turn the Rotary encoder to change the settings. Adjusting the volume for the microphone input You can emphasise or weaken the microphone input volume level. Adjust the setting before placing a call.

Selecting the output speaker You can select the connected speaker in car to output the sound signal of telephone. Always contact your service provider about feature availability and functionality. Alpine reserves the right to change or modify any information or specifications without notice or obligation. F-L: The sound only be output from the front left speaker. F-R: The sound only be output from the front right speaker.

F-LR: The sound be output from the front left and front right speaker. After calling, playback will resume. Previously dialed telephone numbers are stored in dialed calls history. You can redial a number by searching from dialed calls history.

Telephone numbers from received calls are stored in the Received List. You can redial these numbers by searching here. The following steps 1 to 5 are common to the various ways of making these calls.

For details, refer to each individual category for making calls. Turn the Rotary encoder to select the outgoing mode. Dial a call by selecting a person from the phone book list. If it is not updated, you cannot correctly place a call. Turn the Rotary encoder to select a name or a telephone number from the list. The selected telephone will be called.

Depending on the connected mobile phone, this function may not be performed. Please pay attention when the microphone is mounted.

If the name is not registered, a number is displayed. However, increasing the volume excessively may result in feedback. If feedback is noticed as feedback is directly related to the volume, turn down the volume as low as acceptable to eliminate it. Califo rnia 9 , U. Ontar io M3J 2M9, Ca nada. Vict oria 3, Austr ali a. Wilhe lm-W age nf eld-Str. Phone 42 6 Alpin e Hou se.

Phon e 3 3 Paris Nor d Il,. Phone 9. Vi ale C. Get 1 for every time someone downloads your manual. Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual. Buy as much as you need. Lesen Sie diese Bedienungsanleitung bitte vor. Lees deze aanwijzingen aandachtig alvorens dit.

Liste des accessoires Mise sous et hors tension